Hi- have a new surfboard that's periodically rebooting, T4. Power levels look okay at base, but then upstream starts spiking up to 51 before the reboot. System below. Had comcast tech out to look at it, and they said upstream levels were too low, and put in a splitter. That worked for a while, but lately the reboots have started again. Any suggestions?
Downstream Bonding Channel Value Channel ID 1 2 3 4 8 Frequency 561000000 Hz 567000000 Hz 573000000 Hz 579000000 Hz 525000000 Hz Signal to Noise Ratio 37 dB 38 dB 37 dB 37 dB 37 dB Downstream Modulation QAM256 QAM256 QAM256 QAM256 QAM256 Power Level The Downstream Power Level reading is a snapshot taken at the time this page was requested. Please Reload/Refresh this Page for a new reading 2 dBmV 2 dBmV 1 dBmV 1 dBmV 0 dBmV Upstream Bonding Channel Value Channel ID 5 4 6 Frequency 29400000 Hz 36000000 Hz 22800000 Hz Ranging Service ID 9894 9894 9894 Symbol Rate 5.120 Msym/sec 5.120 Msym/sec 5.120 Msym/sec Power Level 46 dBmV 47 dBmV 46 dBmV Upstream Modulation [3] QPSK [3] 64QAM [3] QPSK [3] 64QAM [3] QPSK [3] 64QAM Ranging Status Success Success Success