I have read this forum and was told to post the following information:
Startup Procedure Procedure Status Comment Acquire Downstream Channel 597000000 Hz Locked Connectivity State OK Operational Boot State Configuration File OK Security Enabled BPI+ Downstream Bonded Channels Channel Modulation Frequency Power SNR Correctables Uncorrectables 1 QAM256 597000000 Hz 7.0 dBmV 40.8 dB 69 120 2 QAM256 591000000 Hz 6.9 dBmV 40.8 dB 56 95 3 QAM256 585000000 Hz 7.2 dBmV 40.8 dB 18 67 4 QAM256 579000000 Hz 7.3 dBmV 40.9 dB 51 87 5 QAM256 573000000 Hz 7.1 dBmV 40.9 dB 71 72 6 QAM256 561000000 Hz 6.0 dBmV 40.3 dB 112 152 7 QAM256 555000000 Hz 6.0 dBmV 40.3 dB 127 240 8 QAM256 549000000 Hz 6.0 dBmV 40.2 dB 85 152 Total Correctables Total Uncorrectables 589 985 Upstream Bonded Channels Channel US Channel Type Symbol Rate Frequency Power 1 ATDMA 5120 Ksym/sec 36400000 Hz 43.0 dBmV 2 ATDMA 5120 Ksym/sec 29500000 Hz 42.5 dBmV 3 TDMA 2560 Ksym/sec 24200000 Hz 41.3 dBmV 4 Unknown 0 Ksym/sec 0 Hz 0.0 dBmV CM IP Address 2001:558:4040:25:21c:7bff:fed0:bd7f/128 Current System Time: Wed Sep 17 15:10:26 2014
From Shaper Probe:
DiffProbe release. January 2012. Build 1008.
Shaper Detection Module.
Connected to server 38.98.51.47.
Estimating capacity:
Upstream: 5497 Kbps.
Downstream: 4619 Kbps.
The measurement will take upto 2.5 minutes. Please wait.
Checking for traffic shapers:
Upstream: Measurement aborted due to high packet loss rate.
Downstream: No shaper detected.
Median received rate: 4517 Kbps.
Modem is a ZOOM 5341J
Router is Linksys E1200